You can make an even ceiling in your home in several ways, one of which involves the installation of a stretch ceiling. The canvas of this design allows you to hide all the shortcomings of the base ceiling. Since the stretch ceiling does not reach the wall, a noticeable gap remains between them, which must be hidden. For these purposes, masking tape for stretch ceilings can be used, which will be discussed in this article.
The need for masking tape
When installing suspended ceilings, masking the gaps between the system and the wall is the last step. The presence of the gap itself is explained very simply - the ceiling canvas is not attached to the walls of the room, but to a frame assembled from profiles. In the inner part of the profile there is a space into which a harpoon is inserted, providing a rigid fastening of the ceiling structure.
Masking tape for stretch ceilings is inserted into the gap arising between the profile and the wall. For installation, glue or other fixing materials are not needed - the tape is simply inserted into the remaining unclosed part of the profile and pressed to its place.
Comparison of decorative tape and skirting
Along with masking tape, there are also ceiling skirtings. Both materials are designed for the same purpose - to hide the technological gaps remaining after installing the stretch ceiling. Despite the identical purpose, the installation of the tape and skirting is carried out according to different technologies.
Features of the installation of skirting boards are as follows:
- Skirting boards can only be attached to walls. It is impossible to fix the plinth on the canvas of the stretch ceiling - due to the weight of the product, the canvas will stretch and deform, and light vibrations of the canvas that occur when the air masses move will cause the skirting to peel off. In addition, most types of glue contain solvents that, when applied to the surface of the ceiling, destroy it.
- Based on the fact that the baseboard is attached to the wall, you need to select such products in which the width of the landing surface is maximum. Skirtings that are too narrow simply will not hold in place - this must be taken into account long before inserting the skirting into the suspended ceiling.
- The baseboard can be replaced with a wide molding, and in this case the problem will be solved a little easier - the moldings are initially designed for installation on the wall, so it is very easy to put them on glue, and they will hold firmly in place.
Of course, ceiling plinths are a pretty good and reliable finishing material, which has a lot of advantages. But they also have drawbacks - so, installation of skirting boards is not simple, and it is impossible to dismantle these products after installation without damage. Since skirting boards are mounted on glue, they will have to be torn off and simply discarded when the products become unusable. In addition, for the subsequent installation of new skirting boards, the wall will have to be additionally prepared.
And there can be many reasons for dismantling the stretch ceiling or its individual elements - the need to repair communications laid under the pipe web or flooding by neighbors. When using the harpoon technology of fastening the web, its dismantling will be extremely simple, and the situation with the masking tape will look exactly the same - it is very easily removed from the profile and inserted back.
Stretch Ceiling Edge Benefits
The positive qualities of masking tape for a stretch ceiling are reduced to the following list:
- First of all, it is worth noting the possibility of dismantling. This quality is manifested in a number of situations related to the need to dismantle the ceiling itself, replace its elements or finish the walls. The tape for the stretch ceiling can be removed from its place without any problems and after the completion of all work is installed back.
- Using a decorative tape, you can hide not only the cracks that occur during installation, but also various damage to the base ceiling, as well as the upper part of the walls. This quality is especially evident when used for wall decoration textile or vinyl wallpaper.
- Decorative ribbons are great for arranging joints between individual paintings. Such a connection makes it possible to make the ceiling design complete from a visual point of view.
- Masking tapes are quite flexible and elastic, so they can be successfully used both for finishing straight-line structures and for arranging complex ceiling configurations. Good flexibility also allows you to practically not think about how to insert the insert into the suspended ceiling.
Separately, it is worth mentioning that tapes for stretch ceilings are not amenable to the influence of ordinary detergent solutions, so the assembled ceiling can be washed safely, without fear for its integrity. In addition, in addition to the decorative properties, the decorative tape for stretch ceilings will also reliably close the interior of the profile, and it will not become clogged.
Mounting ceiling tape
Before you insert a masking tape into the stretch ceiling, you need to understand the types of similar products, the list of which looks like this:
- L-shaped. The simplest ceiling tape for suspended ceilings, which is very easy to install - one edge is inserted into the frame, and the second rests on the wall surface. This product category does not have any characteristic features.
- T-shaped. This type of product is characterized in that its two sides rest on the frame and the wall.
- F-shaped. Such masking tapes can only be used in combination with fixing profiles made of plastic.
The most universal edging of a stretch ceiling is the L-shaped masking tapes. These products are quite plastic and flexible, so they can be used with equal success both for stretch ceilings and for gypsum board structures, and regardless of the profile characteristics, the considered type of tapes is suitable for all profiles. It is also worth noting the possibility of using L-shaped tapes in ceilings of complex configuration - for example, multi-level, or rounded.
Masking tapes themselves have good visual characteristics, but they can be increased using various coloring agents. On the market you can find a lot of interesting materials with an extensive color scheme. Having figured out what a masking tape is for stretch ceilings, and choosing its color correctly, you can create a harmonious design that will look very good in a particular interior.
When choosing the color of a decorative ribbon, it is worth considering the following factors:
- If the edging of the stretch ceiling coincides with the color of the canvas itself, then the area of the structure will ultimately increase visually,
- The choice of decorative ribbons in the color of the walls allows you to create the illusion of a higher room,
- You can choose a tape whose color will completely contrast with the color of the ceiling and walls, as a result of which the ceiling will clearly stand out against the background of the room (this material should only be used if the walls do not have geometric flaws, since the contrast color will highlight them).
The decorative side of the issue is given quite a lot of attention, and for good reason - this is where all the variability associated with camouflage tapes lies. One can speak out unambiguously about how to insert a tape into the stretch ceiling - any tape is simply inserted into the groove and pressed, thereby securely fixing itself in the slot connectors of the stretch ceiling frame.
Masking tape on the stretch ceiling is installed around the entire perimeter of the ceiling structure. In order for the installed part to look even in the end, it must be installed at an angle slightly less than 90 degrees. A slight pressure on the wall will ultimately lead to an increase in the strength characteristics of the entire ceiling. If necessary, the tape can always be removed from its place.
Causes of a gap in the wall
Upon completion of the installation work, the question immediately arises about the correctness of the measurements made and the installation technology, if as a result of the work a gap has formed between the ceiling and the walls. In fact, the reason for its appearance is that the web is not fixed directly to the walls, but on a special connecting profile with certain thickness and width parameters. Therefore, close to install it to the wall does not work. In addition, there is a cavity in the profile slats where the fringing of the tension coating is refilled during installation.
That is why a gap is formed at the wall. However, it can be hidden with a special masking tape for a stretch ceiling. The need to use such an element is also due to the aesthetic side. After all, with a decorative plug the room is made much more attractive.
To install ceilings yourself or entrust it to professionals is, of course, your business. Only specialists have much more knowledge and experience in this field. You can also demand a refund for the work or its alteration, if an error occurs, and you are not satisfied with the result.
Purpose and advantages of decorative caps
The masking tape for stretch ceilings used as a finishing element in appearance resembles a thin profile that bends easily, is soft to the touch, but does not break from this. It is made of PVC, like film sheets. With the help of such a universal accessory, it will be possible to get around even the most complex curved structures.
The following advantages are characteristic of the tape:
- reliably masks the gaps remaining after installing the suspended ceiling,
- used when two canvases are fused together, if the room is large in area,
- serves as an element of decor for decoration and decoration of multi-tiered ceiling systems,
- the variety of colors makes it possible to choose the best option for any texture and tone of coverage,
- the tape can be removed and reused after that,
- the material used in the manufacture of camouflage plugs is resistant to chemical compounds,
- products have a long service life, without losing their original appearance,
- ease of attachment does not require certain knowledge and skills. The tape is simply inserted into a special profile,
- available in different lengths, which minimizes the joints between the individual elements,
- does not take away additional space from rooms in comparison with ceiling plinths. This is true for compact rooms,
- is inexpensive.
As for the cons, there are only two of them. And both of them relate to interior design:
- with the help of a tape it’s impossible to hide too obvious wall defects,
- the plug does not allow the installation of a hidden backlight. If you are faced with such a task, you will have to use skirting boards or curtain rods designed for these purposes.
Masking tape
Masking tapes for stretch ceilings in shape are divided into three main types:
- T-shaped plug. The main material used in its manufacture is hard PVC. This texture allows you to finish it only smooth wall surfaces, such as tiles, porcelain,
- L-shaped or L-shaped. For its production, PVC is used with a softer and more flexible texture, therefore, with the help of such a decor element, masking of cracks in wall surfaces with significant irregularities can be made. Very often, this type of tape is used to design transitions from one tier to another in curved drywall constructions.
The versatility of the element allows you to install it very quickly. However, there is a small feature that experienced professionals warn about. The special geometric shape prevents reliable fixing of the tape to the wall if a plastic baguette is used under a stretch ceiling. Therefore, over time, the product begins to bend, and the walls look uneven. Another thing is the aluminum profile, which does not bend. When used as the basis of a suspended structure, the tape will not lose its original shape,
- F-shaped. It serves as a kind of connector between several canvases when the installation of a stretch ceiling is carried out in large areas. Moreover, it can be used without fear for both aluminum and plastic baguettes.
On a note! When purchasing masking tape, consider the information provided by the manufacturer. High-quality products do not have a sharp smell of rubber, and perfectly perform the tasks they face.
Decorative cord
One of the varieties of decorative tape for stretch ceilings is a special cord. It is also installed at the end of installation work. The cord can be made in different weaves and from different materials. It can be an ordinary rope or with added metal threads. The thickness of the models varies and is 8, 10 or 12 mm. Today, this version of the decor is wider than classical ribbons.
The main advantage of a decorative cord is practicality. Any contamination can be removed from the product using normal washing. The cord is simply removable from the ceiling and also easy to install.
Ceiling plinth
Its fastening is carried out in the maximum proximity to the stretch ceiling, so if careless handling can damage the coating. Other disadvantages include:
- inability to reuse. For example, if you want to dismantle the film coating during flooding, the canvas can be returned to its place, and the baseboard will have to buy a new one,
- mounting the skirting board is more difficult than tape or cord. Using it is very difficult to get around the corners in a room,
- high temperatures can cause cracking of the skirting board,
- lack of flexibility allows the use of products only on flat surfaces,
- a skirting board costs more than a masking tape.
But the baseboard has one important advantage - under it you can install LED backlight. Using this technique, soaring stretch ceilings are created.
Masking tape mounting technology
If we talk about installing a stub, then there is no specific technique in this case. With each type of tape used, it is gently pressed into a special groove. Such places for fixing decor elements are called slot connectors. Installing the tape will save you not only from the technical clearance, but also the accumulation of dirt and dust between the wall and the tension coating.
A cap for suspended ceilings is mounted around the perimeter of the room. At the same time, experts do not recommend using glue. For an even seam, craftsmen advise observing a 90 ° angle.
The plug is installed using a conventional spatula. Before you begin to fasten the masking tape, check the evenness of the walls and structure. If possible, eliminate all defects.
Installation is as follows:
- determine and cut the desired length of the element by measuring the length of the wall surface,
- attach it to the gap formed
- with a spatula, carefully insert the plug between the wall and the profile,
- gently squeeze the product, cut off its excess parts.
On a note! If you are installing an F-shaped tape, fasten it with the help of special wall corners or the mounting profile of the PF.
When mounting the tape, make sure that it does not stretch. During installation, it is better to compress the product easily, since during operation it will be affected by different temperatures. If the tape stretches, then over time the joints may separate (if two pieces of fabric are connected with it), and the plug will simply fall out in some areas.
Professionals advise fastening the product in small sections (3-5 m), joining the individual parts through these gaps.
After the tape is installed, the ceiling will get a complete and harmonious appearance. An important advantage of a decorative plug is that it can be used repeatedly. For dismantling, it is enough to gently pry the tape with a screwdriver. After which she effortlessly leaves the profile.
Installation of tape in the corners of the room
In the corners, the edging of the stretch ceiling is also very simple to install. In this case, a spatula is also used. Its alternative may be a rubber mallet.
The technology will be as follows:
- cut the product to the desired length,
- Dock two elements together. It is important that they form a strictly right angle of 90 ° between themselves. An exception is curvilinear structures, during which the angle formed by the masking tape can be large,
- fasten the tape with a spatula,
- cut off excess parts with a clerical knife.
Mounting the corner masking tape
The installation of the corner masking tape for stretch ceilings is carried out without the use of sharp objects to prevent damage to the paintings. For work you will need: tape measure, stepladder and clerical knife.
On a note! All caps are mounted almost identically - at an angle of 90 ° in special grooves.
After you get the tape without cutting its individual pieces from the roll, insert one end into the opening resulting from installation work. Carefully tuck it along the entire wall.
When you approach the first corner, gently cut the product with a clerical knife so that its edge fits into the corner. Continue to insert the plug around the perimeter until you completely close the technical gaps.
Such inserts are used not only for single-level ceilings, but also multi-level structures when it is required to close the joints between adjacent paintings. Stretch ceilings of all levels will no doubt transform any room.
Choice of color of a decorative cap
Making the interior, important attention should be paid to the colors that are planned to be included in the decoration. This applies not only to the shades of walls, floors and ceilings, but also to decorative elements. As for the decorative ribbon, the designers advise choosing colors that will organically complement the basic tones used in the interior.
If you choose the right color, you can not only solve the design problem, but also eliminate a number of defects. In general, the shade of the decorative ribbon is selected according to three parameters:
- in the color of the ceiling. This technique is used in small rooms. Focusing on the decor element, it will be possible to visually expand the boundaries of space,
- in the color of the walls. This method, on the contrary, raises the ceilings and narrows the room,
- in the color of the ceiling and walls. The color tape should contrast with the basic shades of the ceiling and wall surfaces.
An interesting solution can be achieved if the tape is painted in the same shade as furniture or large accessories.
On a note! Masking tapes for stretch ceilings are allowed to be painted in any tone with acrylic compounds. Only painting work is carried out before mounting it to the ceiling.
A wide selection of colors allows you to choose the appropriate option for the stub for any type of decorative canvas.
The edging border for a stretch ceiling has differences not only in colors, but also in textures:
- glossy has a good reflective ability, so often designers combine it with decorative lighting. It is used mainly under glossy canvases,
- matte tapes organically complement matte stretch ceilings,
- patterned and embossed ribbons play a decorative role in the room.
Conclusion
Despite the ease of installation, it is necessary to fasten the tape to the ceiling carefully, observing the following recommendations during installation:
- carefully measure individual fragments. Incorrect measurements can lead to unsightly joints that will spoil the impression of the new ceiling,
- so that the angles as a result of joining are perfectly smooth, it is better to use a miter box,
- a thin layer of oily cream or petroleum jelly will make installation easier if you grease the flange comb with it.
Mount a masking tape for a stretch ceiling even for a beginner. The total time that will have to be spent on installation work will be no more than one hour. But as a result, you can not only give an aesthetic appearance to the new ceiling, but also frame the perimeter of the suspended structure in an original way.
What is masking tape
The masking tape is a strong elastic strip 1-2 cm wide, which is installed around the perimeter of the room to hide the technological gap after installing the stretch ceiling. It is also called: elastic band, decorative insert, wall corner, rubber plug, etc. A tape is made of PVC and polymeric materials. Available in many colors to match the stretch ceiling. It is mounted without the use of glue - it is simply inserted into the groove of the baguette and fixed at the expense of the teeth located on the rear wall of the profile. Thanks to this connection, installation is very easy and does not take much time. If necessary, the plug can be pulled out and installed back.
Masking tape is specially designed as an alternative to skirting to quickly eliminate the technological gap between the wall and the stretch ceiling. In addition, decorative inserts are used when connecting paintings of different textures using a separating baguette, as well as to mask the gap between the levels in multi-tiered structures.
Colors
The surface of the fringing tape can be glossy and matte. In the first case, the molding reflects light well and is a shiny material. Matte inserts do not create glare. Manufacturers offer plugs in a wide variety of colors and shades, making it easy to choose a trim to match the stretch ceiling. Additionally, products for painting are produced. You can order the stub in any color.
Form Options
Depending on the purpose and method of fastening the tension web, ceiling tapes have a different profile section shape:
- T-shaped - Designed for harpoon mounting system. Product width 14 mm. Made from hard PVC, equipped with teeth for better fixation in the profile. Recommended for flat walls.
- L-shaped (corner) - universal, superelastic insert. Suitable for any profile with harpoon mounting system. The width of the tape is 13 mm. It is made of soft PVC, so it does not require circumcision for joining in the corners and qualitatively hides wall irregularities. After installation, the appearance of the edging is practically no different from the ceiling plinth.
- F-shaped - It is used mainly with a plastic profile. Width 10.5 mm. It is mainly used to mask the gap in the niche under the cornice.
- SL-shaped - the widest (16 mm). Due to the elongated lower part it creates a smooth transition from the ceiling to the wall and hides the surface roughness well.
- R-shaped - it is used at a glazing method of fastening. Product width 20 mm. Allows to close slots up to 10 mm thick.
Is masking tape required
Masking tape for suspended ceilings is installed after the installation process without applying glue. The gap between the elastic web and the wall occurs due to the fact that the material is attached to special profiles, inside which there is a cavity. It is she who becomes visible after the installation process. To hide it, you must use special inserts. If you leave the structure without this element, then it will look incomplete. Mounting the insert is just as necessary as creating a skirting board when installing wooden floors.
The choice between masking tape and ceiling skirting
After installing the design, some may have the thought of installing a standard ceiling skirting. But before that, you should consider the features of its use:
- The baseboard is mounted only to the walls. This means that holding such an element will be unreliable. Because of this, you have to buy a very wide baseboard.
- This element makes it difficult to repair the design of the tension web. When replacing the tension web, the owner of the apartment will have to peel off all the skirting boards.
It is worth noting that for such a case it is better to choose a molding, which is adapted for fastening to the wall. The advantage of this product is that after installing masking tape for a stretch ceiling, it can be easily removed. This may be necessary during the replacement of communications above the canvas or in the event of flooding of the apartment from above.
Due to the ease of installation, the camouflage insert can be installed in a short time, without having the skills to work with tension structures. This item is easily pulled out during repair.
If ceiling plinths are installed, then after dismantling, they must be thrown away. In this case, there will be a need to eliminate the imperfections of the wall surface after work. By using a camouflage insert, all of these problems can be avoided.
The advantage of this product over the baseboard is that it is flexible, so even when installed near an uneven wall, it is easily installed without defects on the surface.
Pros of masking tapes
In order not to doubt that it is better to use masking tapes for a tensile structure, their advantages should be considered:
- Ease of installation. For installation, just insert the insert into the groove and secure it.
- Compactness. Unlike the decorative edging for suspended ceilings, the tape is not able to visually significantly reduce the design, since after installation it becomes an extension of the surface.
- Universality. This feature is that the inserts can be used for tensile structures of different manufacturers.
- A large number of models in different colors and shapes. Even in the absence of a tape of a certain shade, the product can be painted on its own.
- The ability to use more than once. After dismantling, the ceiling plinth can be replaced with a new one, and the appearance and shape of the insert remain the same even after prolonged use.
- Flexibility. This advantage facilitates the installation of tapes even in those places where the line of the stretch web is not even.
- Tight to wall and ceiling. Due to this, the insert prevents the appearance of dust in the gap and contributes to maintaining the health of the inhabitants of the apartment.
- Low cost. Unlike expensive moldings and baseboards, a camouflage insert is cheap, but this does not affect its quality. To install such an element, you do not need to buy glue, which also helps to save money.
- Decorative element. Despite the simplicity and practicality of such products, they can complement the interior if the owner of the apartment chooses the right color.
- Reliability. Due to the fact that the insert is made of elastic material, it can serve for a long time and maintain its original appearance. This means that even after several years, it will not fall out of the groove and will hold as tightly as during installation.
But before you install a masking tape on a stretch ceiling, it should be remembered that its disadvantage is the inability to conduct hidden wiring through it.
Install masking tape
The main advantage of such a camouflage element is that it is fixed without glue and therefore does not spoil the surface of the ceiling and walls. Such a decorative insert can also be used to hide joints between several canvases of a tensile structure.
The tape can take several forms, since an angle will require a l-shaped product, and for insertion between several canvases a t-shaped one. The first named species is the most universal, since it can even be used as a plug for plasterboard ceilings.
To install the tape, it is enough to consider its structure and determine which side should be inserted into the profile. Such elements have notches that are adapted to be connected to the protrusions of the plastic element of the stretch ceiling. This means that it is not difficult to guess which side to insert it in. In the case of a joint between several canvases of the tension structure, the insertion is also simple. To do this, install two inserts side by side. After inspecting the tape, it is simply pressed into the gap between the wall and the ceiling using any thin, but not sharp object.
In stores selling stretch ceilings and accessories for them, you can find many color options for such parts, so they can be matched to any shade of the surface. Usually, inserts are bought to match the color of the walls, as their fold is below the plane of the ceiling. But there are products that are made in two colors.
Types of tapes
Masking tapes for a stretch ceiling can be 3 types:
- T-shaped. They are used for installation in gaps near level walls.
- L-shaped. This type is used for walls with irregularities, so all models are made of flexible material. During installation, they repeat the relief of the wall.
- Connecting tapes are used when it is necessary to hide the gap between the joined canvases of the stretch ceiling.
- Ribbons of various shapes. Such products repeat the bends of the stretch fabric.
How to choose a color
Before buying a masking tape, you should determine the desired color, otherwise the joint between the wall and the ceiling will look less attractive. If you select this element in the same color as the ceiling, this will contribute to the visual expansion of the space of the room. This technique should be used if the room is small.
If there is a low ceiling, a tape is chosen to match the color of the walls to visually “lengthen” them. You can also use contrasting colors, but at the same time you need to choose from those that are already used in the interior. If the ceiling consists of several paintings, then you can choose a product of a contrasting color and thus divide the space into several zones.
In the case where the stretch ceiling is a surface with an image, it can be distinguished by dark inserts, which will create the feeling that the image is in a frame. When dismantling the product, so as not to damage it, you need to carefully pull it out of the profile without jerking. Making sudden movements, you can damage the canvas stretch ceiling.
After considering the options for camouflage tape, it remains only to choose the appropriate model for a particular room style. At the same time, you don’t have to worry about the fact that the insert will spoil the appearance of the room, because if you wish, it can easily be replaced with another.
With ceilings, a small gap forms between the wall and the canvas. To eliminate it, various decorative elements are used.Most often resort to the use of masking tape, as it is easy to install and costs much less than a decorative baseboard.
Decorative tape for suspended ceilings: pros and cons
Decorative ribbons are more versatile than classic fillets, as they are easier to assemble. When installing the product, you do not need to use adhesive mortar, dowels or other fixing materials.
Also, the advantages of decorative ribbons include:
- Compactness.
- Reusable. If necessary, decorative tapes are easily dismantled.
- Tapes help hide defects located on the walls.
- High flexibility. Tapes are easily bent, so they can even be installed on multi-level or PVC.
- Low cost. You do not need to purchase adhesive mortar or fasteners.
- High rates of wear resistance.
- Tapes help to avoid the appearance of dust in the gaps.
- Universality. Decorative ribbon, if desired, can be painted in any color. Thanks to this, you can easily create an unusual element of decor. Remember that only acrylic paints can be used to color the tape.
Installation of decorative stretch ceiling tape in the corners
Installing masking tape in the corners is a simple process. Installation is also carried out using a spatula. An alternative is to use a rubber mallet.
The technology of installing the tape in the corners:
- Cut the tape to the required length.
- Dock two products. Remember that they must create a 90 degree angle. If you have curved ceilings, then the angle between them may be slightly larger.
- Secure the tape with a spatula or rubber mallet.
- Cut off excess tape with a hacksaw.
Stretch ceilings are a high-tech design, which takes into account even the smallest details. So, after tensioning the web, an unsightly gap remains between the mounting profile and the wall, which greatly spoils the overall picture. In addition, in all types of profile except cam, the groove in which the polyvinyl chloride film is fixed is visible. There are several ways to get rid of these shortcomings: fill the gaps with sealant, glue the ceiling plinth under the profile, or use a strip such as a masking tape for stretch ceilings. The most popular is precisely the latter method. There are many reasons for this and will be discussed later.
Purpose and properties of the camouflage strip
Despite the fact that the decoration of ceilings with PVC tape is a relatively new type of construction work, considerable experience has been gained in this type of activity.
Attention : Attempts to close the gaps between the tensile structure and the wall with a ceiling plinth, as a rule, ended in damage to the PVC fabric. Its surface became uneven, its glue dissolved, and dismantling became impossible.
The way out was a stub for stretch type ceilings. What is she like? This is a profile made of flexible and soft plastic. He has a special comb for mounting on a mounting baguette. A soft longitudinal strip is attached to the crest, covering all the smallest gaps between the film and the wall.
A camouflage plug for hinged coatings has a lot of positive properties.
So, its undoubted advantages include the following:
- a soft bar covers large and small irregularities, not only on a flat wall, but also on tile
- the flexibility of the material makes it possible to use it on curved surfaces,
- the rich color gamut of products allows them to be used, not only for sealing joints, but also as an element of decor for single-level and multi-level surfaces,
- the tape for hanging paintings looks great at the junction of two paintings in a connecting baguette,
- the elasticity of the material provides a tight fastening of the tape in the baguette, over time, the shape of the comb and strap does not change,
- the product is reusable and can be used repeatedly in case of dismantling the structure,
- the material is resistant to many substances and can be painted with almost any paint,
- for fastening the strip under the ceilings, special devices and glue are not required - it is easily inserted by hand,
- the product is durable, the material does not decay, does not fade and does not dry out,
- affordable price does not significantly affect the repair budget,
- the insert is stored in rolls and sold by footage, which avoids joints during installation.
Different types of this material allow it to be used for certain purposes.
Varieties of tape
Given that stretch ceilings come in various designs and are installed in rooms with the most unexpected geometry, the industry produces several types of tape.
These are products of this configuration:
- T-shaped plug. The bar is made of rigid material and is used for rectilinear structures. This product is used to connect with baguettes of harpoon, wedge and bead type. One edge of the plank is adjacent to the film, the other to the wall. Thus, all structural holes in the baguette and the gaps between it and the wall are completely closed.
- L-shaped plug. This product is made of a softer material and is used for mounting on curved structures. The front side of the strip masks the gap between the film and the vertical surface on which the profiles are fixed.
- Mushroom-shaped decorative plug for connecting profile and closing the groove in the places of transition of one level to another. Using these products of various colors and textures, it is possible to make the junction location inconspicuous or, conversely, it is advantageous to highlight it.
Installation of all types of masking plugs for suspended ceilings is the same. With soft pressure, it is fully inserted into the groove of the baguette, where it is firmly held thanks to the elasticity of the material and the notches in the baguette and in the groove. If necessary, carry out the dismantling of the tension structure, it is enough to pry off the plug at the corner joint and pull down. The product will easily come out of the groove in the profile and open access to the mounting structure.
Decorative tape for tensile structures
Traditionally, a white and smooth plank can approach many surfaces, but not all.
On a note : White canvases gradually fade into the background, giving way to material that has a different color or image. On this basis, manufacturers are trying to keep up with fashion and offer various options for the execution of decorative tape for stretch coatings.
So, for the design of stretched structures, products of the following texture are offered:
- Matt Perfectly combined with matte canvases of any color. This type of decoration is used, as a rule, in office-type rooms and government offices where business style is valued.
- Glossy. Such products can serve as a reflector for the rays of light emitted by the devices of the surface lighting system. A smooth, concave or curved outer surface, reflecting the rays, can create a unique play of light on the canvas and walls. Of course, such strips can only be used to finish a glossy canvas.
- Embossed. Volumetric patterns on a platband for a baguette will give it volume and entertainment. And, the combination of light and shadow will create a unique atmosphere of comfort and coziness.
- Colored. The color scheme of these products, from white to black, is so diverse that it takes a whole page to list it. Matte, glossy and embossed panels are available in color. The use of films of different colors allows you to achieve the optimal combination of the palette of the stretch fabric, masking film and the rest of the interior.
Harmony of form and color
The skillful use of a decorative plug will help, at low financial costs, create various and quite interesting visual effects.
So, using various types and textures of these products, you can achieve these results:
- The tape corresponding to the color of the stretched fabric significantly increases its area. The impression of a large volume and free space. For small rooms this will be a great solution.
- Another and similar design decision will be the selection of color and texture of the film for the color of the wallpaper. This will visually increase the height of the walls, creating the illusion of spaciousness. Glossy canvas will further enhance this effect.
- The use of contrast. As a rule, complete with a stretch ceiling, which has a low cost, the walls are glued with no less expensive and beautiful wallpapers. In order to distinguish between these two surfaces, such a peculiar contrasting method of differentiation is used. One of the conditions for installing a contrasting tape is the perfect evenness of the walls.
- Combination with interior elements. One way to emphasize the originality of the room’s design is to install a plug for a baguette that matches its color with furniture or floors. If the furniture or carpets are replaced, then the strip can be easily and quickly replaced.
The choice of masking film depends on the taste of the owners of the room. If there are few ideas, you can always replenish their supply by looking at the photo galleries of similar products on the Internet.
Even such a simple product as a masking tape for a stretch ceiling requires care and accuracy during installation.
For ease of installation and maintenance, you can use the following recommendations:
- Carefully measure the length of individual fragments. An incorrectly measured and cut fragment will cause the appearance of cracks that spoil the appearance of the entire expensive structure.
- Attention should be paid to fitting angles. For their manufacture you need to use a saw and a miter box.
- To make the crest of the plug easily fit into and out of the baguette groove, you can lubricate it with a thin layer of petroleum jelly.
The fantasy of the designer knows no bounds. Go ahead and experiment!
Related videos
Stretch canvas for ceiling decoration became popular not so long ago. But today they are in demand more than ever. And all thanks to the beauty and practicality, as well as the ability to make the interior more interesting. During installation, gaps form between the stretch ceiling and the walls, which can be hidden in various ways: a illuminated cornice, baguettes or a decorative masking tape. The last option is the most suitable. Why? How to install a masking tape on a stretch ceiling? What if it doesn’t fit? About it further.
"Advantages and disadvantages"
Decorative masking tape differs from other options for masking gaps with a number of advantages:
- ease of installation, for the implementation of which it is enough to just read the attached instructions,
- universality, thanks to which it can be used in tandem with stretch ceilings of different manufacturers,
- unlike the ceiling, it does not change the visual perception of space even when using contrasting shades,
- the ability to reinstall
- the broadest choice: in various shapes, textures and colors,
- flexibility, thanks to which it can be easily used even in corners and to mask the most diverse lines in ceilings that have several tiers (see photo),
- the ability to mask small surface defects, for example, uneven wallpapering,
- preventing the accumulation of grains of sand in the corners,
- long-term use, during which the tape does not deform at all and does not lose its properties,
- low cost in comparison, for example, with ceiling skirting boards.
But the installation of a masking tape in a stretch ceiling has its own drawbacks. For example, after installing it, it will not be possible to set the hidden backlight. Unless in this case it will be necessary to install an additional cornice. In addition, the tape will not be able to hide significant surface defects.
Main varieties
A masking tape is made of polyvinyl chloride, which provides high flexibility of the product. Before you learn how to insert it into the corners, consider what varieties are. So, the following types of tape are distinguished:
The first products are considered multifunctional, characterized by a soft structure and ductility. They can be used both as a finalizer for drywall constructions, and to mask transitions in ceiling structures with several tiers. Such a masking tape for stretch ceilings in the photo can be used with any kind of profiles. T-shaped strips are quite rigid and can only be used on smooth surfaces. When installed, they are attached to both the crate and the wall. Recent tapes are commonly used to fix baguettes.
Selection rules
Properly selected decorative masking tape will harmoniously complete the design of the room. Properly selected its shade will help change the visual perception of space or emphasize any element of the interior (see photo). When choosing a product, the following should be considered:
- tapes, the shade of which coincides with the shade of the walls, will visually increase the height of the ceiling,
- models whose shade matches the color of the ceiling will visually widen the ceiling,
- if the tape is selected in a contrasting color, it is necessary that its shade coincides with any color that is already used in the interior,
- installation of a contrasting product is possible only if the surfaces are smooth, because such a model will emphasize all the existing bumps.
If it is not possible to find a suitable shade when buying a tape, you can paint it yourself using acrylic paint. This must be done before installing the product on suspended ceilings, otherwise there may be a problem that it does not fit.
How to insert?
How to insert masking tape? It should be noted right away that this does not require glue, any specific tools or special skills. Do not use a spatula, as damage to both the wallpaper and the stretch web. It is necessary to install the tape at right angles in special recesses. Installation of various types of products is practically no different from each other. To fix in the grooves, the tape just needs to be pressed a little. To dismantle the structure, if necessary, simply pry off its edges with a screwdriver. More detailed installation of masking tape for suspended ceilings in the video.
The gap formed between the stretch fabric and the walls does not look very aesthetically pleasing. To mask it, use a backlit cornice, ceiling plinth or special tape. It is the latter option that has the highest operational characteristics.
Advantages and disadvantages of masking tape for stretch ceilings
To hide the docking gap, you can use the usual ceiling skirting (fillet), but masking tape for stretch ceilings has a number of advantages:
- Ease of installation . Even a novice will be able to install this product in the gap by following the instructions provided.
- Do not steal space . The masking tape is narrower than the ceiling skirting, so even if you choose a contrasting shade, visually the room will not become lower, as when using a baguette.
- Versatility . The model is suitable for stretch ceilings of any production.
- A wide range of . Tapes are available in various shapes, colors and textures. If desired, you can paint it in the desired color yourself.
- Reusable . If necessary, to finish the walls or dismantle the stretch fabric, you can easily remove the tape and then install it back. This cannot be done with ceiling skirting. In case of dismantling, it will have to be thrown away, since it cannot be reused.
- Surface defects masking . The masking tape hides not only the gaps between the ceiling and the wall, but also small defects in the process of pasting the walls with wallpaper under the ceiling. This is especially true for vinyl or textile wallpaper.
- Flexibility . The tape is used to mask curved lines and crevices in multi-level ceilings of bizarre shapes due to its ductility.
- Dust prevention . Thanks to the installation of masking tape, dirt will no longer collect in the gaps.
- Low cost . The advantage of masking tape can be called its low price, compared with ceiling skirting boards. In addition, for its use adhesive compositions are not needed - the tape is simply inserted into a special groove, which will also help to save some good money.
- Decor element . The tape can not only fulfill the function of masking the gap arising between the wall and the ceiling. It is often used to decorate multi-level ceilings. When splicing two canvases, it is inserted into the connecting profile between them.
- Operation duration . The masking tape serves for a long period, while it does not deform and does not change its size. She holds well and does not fall out of the baguette.
It is also worth noting that the narrow width of the masking tape compared to the ceiling fillet will not always be an advantage. A wide baseboard is more relevant in rooms where you need to hide significant irregularities under the ceiling, for example, deformed wallpaper.
Classification of masking tapes for stretch ceilings
For the manufacture of all models used polyvinyl chloride. It provides high product flexibility.
Depending on its type of tape there are:
- T-shaped . Rigid, applied on smooth surfaces. They are fixed by two extreme sides to the frame and the wall.
- L-shaped . They are considered universal. They are more flexible and soft. Attaches to the frame, the other side rests on the wall at an angle. Due to their elasticity, these tapes can also be used as plugs on drywall constructions. L-shaped tapes are also suitable for concealing transitions on multi-tiered ceiling structures of complex shape. This tape is applied with any kind of profile.
- F-shaped . Suitable for fixing two plastic fixing baguettes.
When purchasing plugs, be sure to pay attention to information from the manufacturer. Please note that products made of high-quality PVC do not emit a sharp rubber smell.
Recommendations for choosing the color of masking tape for stretch ceilings
Correctly selected color of masking tape makes it possible to harmoniously complete any interior design project. Properly choosing the color of the plugs, you can visually transform the room or emphasize individual elements of the decor. On the market you can find stubs of any shades and gradations, even a masking tape of mixed colors of the rainbow.
In the selection process, the following rules should be considered:
- Plugs of the same color as the canvas will make the ceiling visually wider.
- Color models of wall decoration will visually increase the height of the ceiling.
- Installation of masking tape for a stretch ceiling, which differs in color from other surfaces, is possible only with geometrically even walls. Contrast color emphasizes bumps.
- If you choose a masking tape of a contrasting color, then the shade should coincide with those that are already present in the interior, for example, with the color of the elements of decor or furniture.
If there is a need to use a masking tape of a special shade, you can paint it yourself using acrylic paint. This must be done before the plug is locked into the slot.
General impression
The tape is a durable flexible product made of a polymeric material: it does not break, does not lose shape.
Provides a snug fit to the wall and ceiling, so it does not collect dust, virtually no maintenance.
Freely inserted into the slot. No glue and additional tools are required during installation.
It can be used repeatedly. Reliability and durability - there is.
Compared to wide skirting boards, a narrow insert does not reduce space, but the installation of lighting under it is impossible.
It is better to hide the unevenness of the ceiling with a wide skirting board.
Shape difference
Stretch ceiling tape may have a different profile. This is due to the way you enter the opening. In addition, each has additional features:
- L-shaped profile. Very flexible, easy to install, especially in corners,
- T-shaped - more rigid. Best used on hard tiled surfaces,
- F-insert more complex and wider. You need to pay more attention to color for a harmonious combination.
The choice depends on the quality of wall decoration and how to achieve the desired effect.
Mal yes
It would seem that such a small detail, well, what's the difference! And here it is - and she is able to dramatically change the whole image of the room, both for better and for worse.
It is important to choose the right color. tapes under a stretch ceiling. After all, it is also a decorative component. Especially when placed in multi-level structures. With the right approach at the joints and in the gaps of the canvases she will not be equal.
The color scheme is varied. If necessary, the tape can even be painted. This makes it possible to participate in any interior.
A tape of one tone is usually glued around the perimeter of the room. In the case of multi-colored sides of the ceiling, tapes of appropriate shades are used.
There are certain rules for choosing the color of the insert:
- bright should match the tone of the interior or decor component,
- the tone of the walls makes the room taller
- tone-on-tone with the ceiling expands it,
- contrasting color is appropriate for curved multilevel structures.
Bright insert emphasizes the unevenness of the walls and ceiling.
Special inserts for two-level ceilings
In two-tier structures, the gap between the levels is masked by special inserts:
- oval - the most aesthetic appearance and reliable fixation in the profile,
- tube - has increased flexibility and is well suited for curved shapes,
- fungus - is produced mainly in white.
All three types are also suitable for masking the gap in separation baguettes, which are used in single-level designs when connecting canvases of various colors or textures.
How to choose a decorative plug
A huge range of inserts allows you to choose a product of any color. As a rule, masking tape is chosen in the same color and texture with a stretch ceiling. White edging goes well with any light surface. Color inserts, depending on the color scheme, allow you to get various visual effects:
- Framing to the tone of the stretch fabric visually increase the area of the ceiling and create the impression of spaciousness. This technique is effective in small rooms.
- Decorative tape to match the walls visually make them taller and suitable for low rooms.
- A contrasting insert will turn the ceiling into a framed picture. But the walls should be perfectly smooth, otherwise the defect will become more noticeable. Contrast piping will look great if there is an object of the same color in the room. If there is an image on the stretch web, the plug is matched to the painted details of dark shades.
- For a two-color ceiling, it is better to use inserts of different colors. This solution will help to visually divide the room into zones for various purposes.
When choosing a decorative insert, in addition to the visual component, it is important to consider the type of profile and the condition of the walls. With a glazing bead fastening, it is possible to install only a P-shaped plug, the remaining types are used with a harpoon system. For two-tier structures and joining canvases, special dividing inserts are used. If the wall surface is not very smooth, it is better to give preference to a wide SL-cap, which will hide this drawback.
As for the cost, the most budget option is white matte plugs. Colored will cost more, and the price of painting on order is 2-3 times higher than the finished tape. However, the high costs will be justified by the opportunity to create an original interior.
Important! Do not purchase products with a strong odor, this indicates a poor quality of materials. Vapors may be harmful to health.
Which is better: ceiling plinth or masking tape
You can also close the technological gap with the help of a ceiling plinth. Consider the advantages and disadvantages of such a decor compared to masking tape.
Pros of the ceiling plinth:
- allows you to install additional lighting, for this it is glued just below the ceiling, and an LED strip is placed on top,
- able to hide wide gaps,
- it is possible to create a stucco effect.
- installation requires special tools and adhesives, which increases the cost and time of work,
- does not have sufficient flexibility, respectively, not suitable for finishing curved sections,
- only attached to the wall, so you need to choose light and wide fillets, otherwise the fixation will be unreliable,
- during dismantling, it will not be possible to reuse the product, and if the baseboard was glued to the wallpaper, they will suffer,
- if necessary, remove the tension web, for example, to access the communications on the ceiling, the fillets will have to be torn off.
Easy installation
IN suspended ceilings It is produced very quickly, it all depends on the volume and design. It is advisable to have a reserve of several meters.
All types of stub inserts, although they have different types of profiles, are installed the same way. Simply masking tape for stretch ceilings is inserted with your hands into the groove between the wall and the ceiling or between the connecting canvases.
In this case, one must always remember that the canvas does not tolerate cuts and only a smooth tool can be used. A spoon will do.
To use glue is highly not recommended in order to avoid damage of a cloth.
You do not need to cut the tape in advance to the size of the wall. When reaching the corner, gently cut off so that the edge clearly fits into the inner corner. The protruding corners of the insert should smoothly bend around.
At the end, irregularities are smoothed out with a dry cloth.